HVAC · Full Systems

HVAC System Installation

Full HVAC system installation across the UK — integrated heating, ventilation, air conditioning and controls, delivered as a single design-and-build package by one accountable contractor.

Request a quote See pricing

From: £45,000 per building
Timeline: 15–60 days depending on building scale
Warranty: 5 years parts & labour

Why choose this

Single-contractor accountability from design to handover
Integrated BMS controls across all plant
Heat-pump-first designs for MEES compliance
Full commissioning to CIBSE Commissioning Code

What's included

Heat-load design to CIBSE Guide A
Ceiling cassette, ducted or VRF architecture
Roof/plant-deck condenser positioning
Fire-stopping through compartment walls
BSRIA BG 49 commissioning and handover pack

Who this hvac system installation service is for

We deliver hvac system installation for commercial developers, landlords, fit-out contractors, office refurbishments and mixed-use schemes. Typical projects sit in the 40 kW to 1 MW total plant capacity band, and every scheme is designed by an F-Gas certified engineer against a full CIBSE Guide A heat-load calculation — never a rule-of-thumb watts-per-square-metre guess.

We cover the whole UK from London-based engineering hubs, with same-week surveys inside the M25 and 7–14 day lead times nationally. All work is delivered by directly-employed engineers rather than subcontractors, so the person who quotes your job is accountable for how it is installed and commissioned.

System types we recommend

A full HVAC scheme integrates the cooling plant (chillers or VRF), heating plant (heat pumps, gas boilers or district heat), ventilation (AHUs with heat recovery) and controls (BMS with BACnet/Modbus). Single-contractor delivery eliminates the interface disputes that plague split-trade projects.

Every specification is written against your actual building fabric, occupancy pattern and electrical capacity. We do not resell a single manufacturer — the design drives the equipment choice, not the other way around. If your incoming supply is constrained, we flag it at survey and offer a phased approach or a load-shedding controller rather than pretending the problem does not exist.

The survey, design and installation programme

A senior engineer attends site within 3–5 working days of enquiry. The survey covers heat gains (fabric, solar, occupancy, equipment), electrical capacity, condenser positioning, structural loading, acoustic constraints to neighbours, drainage routes and any planning/landlord constraints. Photos, measurements and load calculations feed into a written fixed-price proposal within 48 hours.

Once awarded, we produce a full drawing pack — pipe routes, electrical schedule, condenser structural loading, refrigerant volume and BS EN 378 risk assessment. Installation runs to a published programme with daily photo updates. Commissioning follows BSRIA BG 49 with a full test-and-balance report, an F-Gas record and manufacturer warranty registration on the day of handover.

Costs, timeline and running expenses

HVAC System Installation typically starts at £45,000 per building for a compact single-zone scheme. Multi-zone and specialist projects scale with equipment tonnage, condenser positioning complexity and any out-of-hours working requirement. Programme duration is 15–60 days depending on building scale. We quote fixed prices — nothing is added on site without written change control.

Modern integrated HVAC delivered as a single package typically achieves 30–45% energy reduction versus split-trade retrofits, because the controls integration is coherent from day one rather than patched together at commissioning. Modern R-32 inverter equipment routinely delivers seasonal efficiency ratings (SEER) between 6.5 and 8.5, which is 30–50% better than the R-410A systems installed a decade ago. On heat-pump duty, coefficients of performance (COP) sit between 3.5 and 4.5 in UK conditions — comfortably ahead of gas heating on marginal-cost pence-per-kWh once carbon pricing is factored in.

Compliance, warranties and aftercare

Every installation is notified under Building Regulations Part P (electrical) and Part L (energy) where applicable, and lodged with the appropriate competent-person scheme. Systems containing 5 tCO₂e or more of F-Gas refrigerant require statutory annual leak checks under Regulation EC 517/2014 — we hold the F-Gas company certificate and can act as your Responsible Person, keeping records for HMRC and Environment Agency inspection.

Equipment carries a 5-year manufacturer parts warranty (compressor included) when installed by an accredited engineer. We register the warranty on the commissioning day so there is nothing for you to file. Our installation workmanship carries a 12-month cover-all warranty, and PPM service plans start at £110 per outdoor unit per year — sufficient to preserve manufacturer cover and catch drift before it becomes downtime.

Brands we install and why

Manufacturer selection follows the design — Daikin, Mitsubishi Electric and Airedale for equipment; Trend, Priva and Cylon for BMS integration.

All refrigerant work uses R-32 (GWP 675) as standard, with R-454B (GWP 466) available on request for future-proofing against the F-Gas phase-down schedule. We steer clients away from R-410A (GWP 2088) for any new install — the refrigerant is being progressively withdrawn from supply and top-up costs will rise sharply between 2026 and 2030.

Working around your operation

Downtime is the hidden cost of any air conditioning project. We routinely deliver work in evening slots (18:00–02:00), Sunday shutdowns and staged week-by-week phasing so your day-to-day operation continues unaffected. Overnight and weekend working commands a modest 10–20% uplift which we itemise transparently at quotation.

Dust management, negative-pressure containment and daily photo close-out reports are standard for any works in occupied premises. Where a phased approach is chosen, we deliver temporary cooling (portable spot coolers or hire chillers) to bridge critical zones during the transition — priced separately so you can choose whether the resilience is worth the line item.

Why choose us for this work

We are F-Gas certified installers with directly-employed engineers, fully insured to £10m public liability and £5m professional indemnity. Every project comes with a fixed price, a written programme, a photo record and a 5-year warranty on equipment plus 12 months on workmanship. We publish real client references on request — not gated behind a form.

Request a quote online and we will book a site survey. Same-week surveys inside the M25, 7–14 day lead times nationally, and a qualified engineer attending the survey rather than a scripted call-centre operator.

Frequently asked questions

How much does hvac system installation cost?＋

Fully-fitted prices start at £45,000 per building. Multi-zone and specialist projects scale with equipment tonnage and installation complexity. All quotes are fixed price — no on-site supplements.

How long does the installation take?＋

15–60 days depending on building scale

Do you handle Building Regulations sign-off?＋

Yes. Part P electrical work is notified via our NAPIT/NICEIC scheme and Part L energy compliance is documented in the commissioning pack. You receive certificates on the day of handover.

What refrigerant do you use?＋

R-32 as standard (GWP 675). R-454B (GWP 466) is available on request for maximum future-proofing against F-Gas phase-down. We do not install R-410A for new schemes.

Do you offer service and maintenance plans?＋

Yes — PPM plans start at £110 per outdoor unit per year and include filter cleans, coil disinfection, drain-line flush, refrigerant pressure check and electrical inspection. Statutory F-Gas leak checks are included on qualifying systems.

What warranty applies?＋

5-year manufacturer parts warranty on equipment (compressor included) plus 12 months workmanship warranty on our installation. Annual servicing preserves manufacturer cover.